Description
About this product
Ideal for conversions, our campervan insulation is a well performing, cost effective and sustainable solution. At 50mm thickness it has brilliant thermal conductivity whilst being lightweight and easy to fill in hard to reach places.
This campervan insulation can be used on its own as an economical conversion option or in combination with sound deadening and thermo liner to create a well insulated van, suitable for harsher conditions. The energy savings that this product give means that it will pay for itself in just a few years.
100% recycled polyester and made up nearly entirely of PET plastic bottles, not only is our insulation good for the environment it also performs well. It will not absorb moisture, meaning it will not contribute to creating damp and it will help reduce the chance of condensation. Soft to the touch, this insulation is non-irritable and contains no harmful chemicals or binders and is completely safe to handle.
Perfect for your campervan conversion, it is easy to work with and can be cut by using scissors, a blade or simply torn from the roll.
How much do I need?
We always recommend that you calculate how much material you need based on the specific areas you are covering in your conversion. We suggest that you aim to cover almost all of your panels, and any gaps or voids in the metal work of your van for best results.
Each pack comes as a 390mm x 10,000mm (0.39m x 10m) roll and will cover a total of 3.9 sq. m.
From our experience we have put together a recommendation:
- 1 roll = VW Caddy or similar
- 2 rolls = VW Transporter / Ford Transit Custom
- 3/4 rolls = Fiat Ducato / Citroen Relay / Peugeot Boxer (Up to L3 H1)
- 4/5 rolls = Fiat Ducato / Citroen Relay / Peugeot Boxer (XLWB or L3 H2)
The above is a guide only, depending on your specific conversion you may require less or more than above.
How to apply
1. Measure the section of the van that you are about to cover
2. Roll out the insulation to the required length and cut or tear off
3. Spray one side with high temperature spray adhesive
4. Wait 30 seconds for the glue to prime
5. Apply the insulation directly to the required area and apply pressure across the surface to make sure it is all stuck firmly
Technical Specs
- Roll width: 390mm
- Roll length: 10,000mm (10m)
- Total coverage: 3.9 sq. m
- Material: >95% recycled PET plastic
- Declared thermal conductivity: 0.040 W/mK
- Flammability tested in accordance with BS5803: Pass
