Description
This water tank kit only fits the L3 and L4 Fiat Ducato, Citroen Relay and the Peugeot Boxer from 2006 to early 2019 models and has been put together to provide a convenient and hygienic solution to provide fresh and waste water tanks for your camper. The tanks are manufactured from high quality polyethylene which provides excellent underfloor durability and is algae and corrosive resistant.
Fresh water fitment:
The 75 litre fresh tank fits widthways across the van in the void between the two chassis members, directly behind the exhaust back box. The service hatch will face upwards with the cut out end with up against the drivers side of the van (You may need to relocate a small conduit along the drivers side chassis rail)
Waste water tank fitment:
The 45 litre waste tank fits next to the fresh tank on the passenger side close to the sill and towards the rear of the van. The waste tank fits neatly in between the next set of chassis rails down from the fresh water tank.
If your vehicle is a late 2018 or early 2019 model, please check the handbrake cable location prior to ordering. The handbrake cable on the later models runs the full length of the vehicle meaning that the fresh tank can’t be fitted across the width of the vehicle. If this is the case, you can fit two of our 55 litre tanks down either side of the van for a fresh and waste water set up.
The full kit consists of the following:
Fresh water tank kit:
• 1 x 75 litre water tank L: 1000mm W: 300mm D: 225mm
• 1 x Black or White locking inlet with 2 keys (Please choose colour when ordering)
• 1 x 40mm inlet
• 1 x 1/2″ angled water fitting
• 1 x 1/2″ straight water fitting
• 1 x 3/4 drain tap
• 1 x Metre 40mm filler pipe
• 1 x Metre 3/8″ breather pipe
Waste water tank kit:
• 1 x 45 litre water tank L: 500mm W: 400mm D: 255mm
• 1 x ½” elbow breather
• 1 x ¾” elbow connection
• 1 x ¾” drain tap
• 1 x 1 metre ¾” convoluted black hose
• 1 x 1 metre ⅜” breather pipe
Each kit comes with 1m of hose as standard, should you need more, please use the drop down menu to select which length you require. On the fresh water tank kit, we would advise that you order the same amount of 40mm filler hose and breather hose as this usually runs parallel up to the locking filler cap.
We also stock a universal fitting kit that allows you to secure the tank externally underneath the vehicle. See the related items below for details.
