Description
This kit is suitable for the L2, L3, L4 Fiat Ducato, Citroen Relay and the Peugeot Boxer from 2006 to early 2019 models and has been put together to provide a convenient and hygienic solution to provide fresh and waste water tanks for your camper. The tanks are manufactured from high quality polyethylene which provides excellent underfloor durability and is algae and corrosive resistant.
Fresh water fitment:
The 75 litre fresh tank fits widthways across the van in the void between the two chassis members, directly behind the exhaust back box. The service hatch will face upwards with the cut out end with up against the drivers side of the van (You may need to relocate a small conduit along the drivers side chassis rail)
Waste water tank fitment:
The 45 litre waste tank fits next to the fresh tank on the passenger side close to the sill and towards the rear of the van. The waste tank fits neatly in between the next set of chassis rails down from the fresh water tank.
Included in this kit is our universal tank strap fitting which contains all the parts required to mount the tank underneath your van and will need to be cut to suit your installation.
If your vehicle is a late 2018 or early 2019 model, please check the handbrake cable location prior to ordering. The handbrake cable on the later models runs the full length of the vehicle meaning that the fresh tank can’t be fitted across the width of the vehicle. If this is the case, you can fit two of our 55 litre tanks down either side of the van for a fresh and waste water set up.
Fitting Instructions:
This tank fits widthways (driver to passenger side) across the van in the void between the two chassis members, directly behind the exhaust box. The service hatch will face upwards with the corner cut out going around the handbrake cable.
Due to the placement of the handbrake cable on this van, this is the only place the tank will fit therefore you will only be able to fit one 75 litre tank underslung unless you have an extra long wheel base (XLWB) vehicle. The XLWB (L4) variation of these vans will allow for x2 of these tanks to be fitted providing there are no aftermarket modifications on your van.
The 20psi Shurflo pump is well known within the industry and will comfortably power taps and shower outlets with ease. We’ve also included the filter, 2m of blue ½” water hose and 2 jubilee clips so you can get the pump attached to the water tank ready for the rest of your install in this comprehensive package.
The full kit consists of the following:
Fresh water tank kit:
• 1 x 75 litre water tank L: 1000mm W: 300mm D: 225mm
• 1 x Black or White locking inlet with 2 keys (Please choose colour when ordering)
• 1 x 40mm inlet
• 1 x 1/2″ angled water fitting
• 1 x 1/2″ straight water fitting
• 1 x 3/4 drain tap
• 1 x Metre 40mm filler pipe
• 1 x Metre 3/8″ breather pipe
• 1 x Universal tank strap kit
Waste water tank kit:
• 1 x 45 litre water tank L: 500mm W: 400mm D: 255mm
• 1 x ½” elbow breather
• 1 x ¾” elbow connection
• 1 x ¾” drain tap
• 1 x 1 metre ¾” convoluted black hose
• 1 x 1 metre ⅜” breather pipe
• 1 x Universal tank strap kit
Each kit comes with 1m of hose as standard, should you need more, please use the drop down menu to select which length you require. On the fresh water tank kit, we would advise that you order the same amount of 40mm filler hose and breather hose as this usually runs parallel up to the locking filler cap.
